

Components
The most extreme GeForce RTX 3070 Ti has been unveiled. Galax GeForce RTX 4070 Ti HOF received a cooler from RTX 4090 HOF
Two models appeared in the Hall of Fame line of Galax extreme video cards focused on overclocking – HOF OC Lab Plus and HOF OC Lab. Both of them allow you to squeeze all the juice out of the GeForce RTX 4070 Ti, since already out of the box the TGP level is 320 W (that is, by default it is already 35 W more than the base level), but in P Mode the TGP value can be increased to 336 W .
Another notable feature is that the video card cooler is very reminiscent of the cooler from the GeForce RTX 4090 HOF. According to official data, there is an evaporation chamber connected to nine heat pipes. There are three fans: two have a diameter of 112 mm, the diameter of the one in the middle is 92 mm.
To ensure full overclocking, Galax provided the GeForce RTX 4070 Ti HOF with an adapter with three 8-pin connectors (most versions of this video card have an adapter from two 8-pin connectors to a 16-pin connector). Obviously, the power supply subsystem of the novelty has also been improved.
The difference between the two models is in the frequencies. The base frequency and the frequency in S-Mode are the same – 2310 and 2610 MHz, respectively. But in the P-Mode mode, the GPU of the Plus version can be accelerated to 2760 MHz, while the limit of the regular version is 2715 MHz.

Components
We waited two months and we will wait another two weeks. AMD told when it will release a new driver for Radeon RX 6000 and other cards (older)

AMD top manager Frank Azor, who is responsible for the direction of gaming solutions, promised users of 3D cards Radeon RX 6000 and older a new Adrenaline driver: it will appear within two weeks.
The situation, if not extraordinary, is rather strange: since the release of the Radeon RX 7000 line, the company has consistently updated the driver for them four times already, while for models based on the RDNA2 architecture (that is, the Radeon RX 6000) and older, not a single driver has been released.
In general, the company adheres to the strategy of releasing a unified Adrenaline driver for all models of its video cards (at least for those based on the RDNA3 and RDNA2 architectures), and Frank Azor once again confirmed this. But only recently the implementation of this strategy has stalled.
Components
The GeForce RTX 4060 Ti can be 20-25% faster than the RTX 3060 Ti. Tests of Nvidia adapter based on GPU AD106 appeared

The first test results of an Nvidia video card based on the AD106 GPU in its full configuration have appeared on the Web.
What this model will be called is still unclear, but based on early leaks, it could be the GeForce RTX 4060 Ti. True, those very leaks attributed to it a little less CUDA cores, that is, the GPU will be slightly cut.
So, the AD106 configuration allegedly includes 4608 CUDA cores. Also, the specified video card has 8 GB of memory and probably a 128-bit bus. Tests in AIDA64 are not related to reality, but the results in 3DMark are already more useful.
The GeForce RTX 4060 Ti (let’s call it that for convenience) was compared with the RTX 3070 Ti and RTX 2080 Super. You can see that the new product, depending on the test, is either a little faster or a little slower than the RTX 3070 Ti. We can say that there is parity between the cards. At the same time, the TDP of the novelty is 180 W versus 290 W for the RTX 3070 Ti.
According to the leaks, the RTX 4060 Ti will receive not 4608 CUDA cores, but 4352 cores, that is, about 5% less. Accordingly, the performance may be a little less, but here the situation will also depend on the frequencies. Either way, if the information is correct, the RTX 4060 Ti will be about 20-25% faster than the RTX 3060 Ti. However, at the same time, you need to understand that the new product can be more expensive, because so far in the RTX 40 line, this is exactly the situation relative to the RTX 30.
Components
Nvidia quietly released the most powerful version of the GeForce RTX 3060, but it only has 6 GB of memory

Nvidia seems to have quietly released another version of the GeForce RTX 3060 graphics card. A version with the GA106 GPU in its full configuration has been added to the TechPowerUp database.
That is, such an adapter has 3840 CUDA cores versus 3584 cores for the regular RTX 3060. By the way, the mobile RTX 3060 just has the same 3840 CUDA cores, but due to significantly lower frequencies, of course, it cannot compete with the desktop version.
The source says the new RTX 3060 is already in use in some off-the-shelf PCs from Asus, Dell, MSI and others. At the same time, such a card may not appear in retail.
Interestingly, the memory capacity of the new modification is only 6 GB, that is, half as much as the original card. As a reminder, there is also a retail RTX 3060 with 8 GB of memory and a 128-bit bus, which was introduced at the end of last year.
How critical 6 GB of memory will be for the RTX 3060 is difficult to say without tests, but the mobile versions have exactly this amount of memory.
The source suggests that the new version was released in order to get rid of the GA106 GPU stock faster.
-
Laptops6 days ago
The Fujitsu UH-X/H1, an ultra-light 14-inch laptop, is introduced. Its weight is only 689 grams
-
Laptops6 days ago
Unexpectedly: LG uses Samsung OLED panels in its thin and light Gram laptops
-
News5 days ago
Microsoft has updated Skype – new features, fixes and improvements for all platforms
-
Components5 days ago
The next generation of gaming laptops comes out on February 1st. Models with GeForce RTX 4090/4080 will appear first