Connect with us
The flagship Qualcomm Snapdragon 898 has shown its capabilities The The flagship Qualcomm Snapdragon 898 has shown its capabilities The

News

The flagship Qualcomm Snapdragon 898 has shown its capabilities. The test results appeared in Geekbench

Published

on

The authoritative insider Ice Universe, which often publishes accurate information about Samsung’s new products, posted the test results of the top-end Qualcomm Snapdragon 898 single-crystal system.

Qualcomm’s Snapdragon 898 mobile platform, due to be unveiled in December this year, will be used in most flagship smartphones in the first half of next year. In single-threaded mode, Qualcomm Snapdragon 898 scored about 1200 points, and when using all cores, the result was about 3900 points.

According to previously published information, the Qualcomm Snapdragon 898 mobile platform will be manufactured using Samsung’s 4nm process technology. It will use a three-cluster architecture: a large Cortex-X2 core operates at 3.0 GHz, three Cortex-A710 cores operate at 2.5 GHz, and four small Cortex-A510 cores at 1.79 GHz.

For a long time, sources called Xiaomi the first manufacturer to release the Snapdragon 898 smartphone. Smartphone Xiaomi 12 should be presented in December this year. However, now rumors have spread that Lenovo may be the first with Motorola’s new flagship.

Ice Universe has provided accurate information on Samsung smartphones and image sensors many times, including the recent announcements of new 50MP and 200MP sensors. He was also the first to show accurate images of smartphones with waterfall screens.

Click to comment

Leave a Reply

Your email address will not be published.

News

Friday: Pfizer Partners with Marvel to Further Promote Vaccination in the Population

Published

on

Friday Pfizer Partners with Marvel to Further Promote Vaccination in

Pfizer-BioNTech has agreed with Marvel to release a comic book where Ultron turns into COVID-19, and the Avengers into vaccines and boosters from this company.

Friday: Pfizer Partners with Marvel to Further Promote Vaccination in the Population

A superhero is not only Spider-Man, Superman and Iron Man – anyone can become one. The main criterion is to be vaccinated.

In the special issue of the comic “Everyday heroes” (English – heroes every day), the Avengers save humanity along with ordinary citizens.

One of the main characters of the comic is a former builder who restored buildings destroyed by superhero battles. In the final part of the issue, he notes: The Avengers “are doing their part to ensure our safety, now it’s time for us to do ours.” As a result, the man receives a re-vaccination against COVID.

Friday: Pfizer Partners with Marvel to Further Promote Vaccination in the Population

It is worth noting that the latest vaccination campaign is sluggish – only one in 20 Americans has been injected. Analysts suggest that Pfizer is pursuing such a collaboration with Marvel, rather, the issue of making a profit, to which they are accustomed to two years of a pandemic, and not so much caring for the population.

Continue Reading

News

Clone Robotics unveils robotic arm with muscles and skin

Published

on

Clone Robotics unveils robotic arm with muscles and skin

Clone Robotics demonstrated its latest development – a robotic arm, which is designed to resemble a human as much as possible. This arm has muscles that are covered with synthetic leather. The muscles were developed by the Clone Robotics team and were based on the idea of ​​the inventor McKibbin, which was used in prostheses back in the 1950s. In fact, such muscles are mesh tubes, inside of which are balls filled with air. An external pneumatic or hydraulic pump inflates the ball, it expands, and as a result, the muscle contracts in the longitudinal direction.

Clone Robotics unveils robotic arm with muscles and skin

But the creators of the robotic arm did not want to make the pump too bulky and were looking for a design that could simply be applied with an electric current and made it contract. So they filled the balloons with a liquid – acetaldehyde – and placed a heating element in them. When an electric current is applied to it, the liquid boils and the pressure inside the ball increases by more than 6 times. This allows the muscle to contract “impressively fast,” the developers note. The prototype arm is covered in translucent skin so that the movement of the muscles can be seen.

Clone Robotics unveils robotic arm with muscles and skin

As for the “skeleton” of the hand, it consists of artificial “bones” resembling human ones, on articulated joints to provide a range of motion as close as possible to a human. The developers claim about 27 degrees of freedom: for example, the hand can naturally move the wrist, rotate the thumb, etc., all of which are driven by a complex combination of muscles and tendons. During the tests, the hand was even able to lift a dumbbell.

Clone Robotics unveils robotic arm with muscles and skin

By the end of 2022, Clone Robotics plans to ship such robotic arms to customers. At the same time, the cost of the device has not yet been reported. With their next product, the company is going to make a full torso with a stiff spine that includes 124 muscles in the neck, shoulders, arms, chest and upper back. He will ride on a platform with a battery.

Continue Reading

Tablets

Fans of top Samsung tablets will have to wait. The company will not release the Galaxy Tab S9 line in early 2023

Published

on

Fans of top Samsung tablets will have to wait The

Samsung has postponed the launch and even the start of the development process of the new flagship Galaxy Tab S9 tablets.

The source says that the company originally planned to start development in December, but now it has been postponed until next year. That is, new models will not be able to come out at the beginning of 2023. Recall that the Galaxy Tab S8 line debuted in February.

Fans of top Samsung tablets will have to wait.  The company will not release the Galaxy Tab S9 line in early 2023

Tab S8 Ultra

When exactly the new tablets will be released is unknown. Perhaps they will be presented at the end of August at the Unpacked event, where new folding smartphones are usually announced.

Changes in Samsung’s plans are due to the situation in the market. In particular, falling demand for mobile devices and PCs.

The decline in demand is also expected to disrupt Samsung’s plans to manufacture and ship tablets this year. Late last year, the company set a target of 400,000 S8 Ultra models, 900,000 S8 Plus models, and 1.2 million base Tab S8 models.

Continue Reading

Most Popular