Connect with us
Lian Li Q58 is designed for mini ITX boards Lian Li Q58 is designed for mini ITX boards

News

Lian Li Q58 is designed for mini-ITX boards

Published

on

Lian Li has announced the release of the Q58 computer case, designed for small-sized PCs. The 342 x 170 x 250 mm case accommodates a mini-ITX motherboard and expansion cards up to 320 mm in length. The height of the processor cooling system can be up to 67 mm, and the length of the power supply must not exceed 160 mm (SFX, SFX-L and ATX units are suitable for installation in the case). From which power supply unit is chosen, it depends on how many and which drives will fit in the case. If it is an ATX power supply, there is only room for two 2.5-inch drives, and if it is an SFX or SFX-L, then the case can accommodate four 2.5-inch drives. Instead of one of them, you can put a 3.5-inch drive.

A similar picture applies to fans. In the version with the SFX PSU, a pair of 120 mm or 140 mm fans are placed on top, and in the version with the ATX PSU – only one. Either way, another 120mm fan can be attached to the bottom of the case.

Lian Li Q58 is designed for mini-ITX boards

Lian Li Q58 is designed for mini-ITX boards

Lian Li Q58 is designed for mini-ITX boards

Lian Li Q58 is designed for mini-ITX boards

If you want to use LSS, it should be borne in mind that in the version with the SFX PSU, a radiator up to 315 mm long will fit on the top wall (by sacrificing the front drive tray, you can win another 10 mm), and if an ATX unit is chosen, then there is only room for a 120 mm radiator. You can also put a 120mm radiator on the lower mounting points of the fan.

The body panels are made of aluminum. At the bottom left of the front panel there is a USB 3.0 connector, a USB 3.1 Type-C connector and an audio connector.

The black Q58 with a PCIe 3.0 riser costs $ 120, the white one $ 130, the black one with a PCIe 4.0 riser $ 150, and the white one $ 160. ARGB tape and mesh side panels are available as an option. Both cost $ 16.

Click to comment

Leave a Reply

Your email address will not be published.

Laptops

This is the world’s lightest 16-inch laptop. It is equipped with an OLED screen and weighs only 1.1 kg

Published

on

This is the worlds lightest 16 inch laptop It is equipped

Acer has launched the world’s lightest 16-inch laptop. Acer Swift Edge was shown a couple of months ago, but now it has become known that the novelty has appeared on sale at a price of $ 1,500.

Acer Swift Edge really impresses with its weight. With a 16-inch screen, the laptop weighs only 1.1 kg! This is not much even for 13-inch models, let alone 16-inch models.

This is the world's lightest 16-inch laptop.  It is equipped with an OLED screen and weighs only 1.1 kg

To achieve such a mass, Acer came out, including through the use of an aluminum-magnesium alloy and not the largest battery. It here has a capacity of 54 Wh, which is quite small for a 16-inch model. But this supposedly should be enough for 10 hours of work, according to Acer itself.

But low weight is not all that a laptop can please. First, it also has a 4K UHD OLED screen. Secondly, the Ryzen 6000U processors serve as the heart, which are not only very productive, but also offer very powerful iGPUs.

From the rest, you can note RAM up to 32 GB, SSD up to 1 TB, a pair of USB-C 3.2 Gen2 ports with support for DisplayPort and USB Power Delivery, HDMI 2.1, two USB 3.2 connectors, Wi-Fi 6E and Bluetooth 5.2.

For those same $ 1,500, a far from the most basic version with a Ryzen 7 6800U, 16 GB of RAM and a 1 TB SSD is already available. That is, modifications with the Ryzen 5 6600U will be even cheaper, but there are no prices yet.

Continue Reading

Components

Yes, the Ryzen 7000 gets very hot, but the Ryzen 5 7600X is quite enough to run the usual inexpensive cooler

Published

on

Yes the Ryzen 7000 gets very hot but the Ryzen

The Ryzen 7000 processors proved to be very productive, but also quite hot. Power consumption and temperatures have grown to about the level of Intel Alder Lake, and this affects the choice of cooling system. Can a regular AMD box cooler even handle a six-core Ryzen 5 7600X?

Yes, the Ryzen 7000 gets very hot, but the Ryzen 5 7600X is quite enough to run the usual inexpensive cooler

Despite the fact that this CPU has only six cores and power consumption in the range of 90 W, in many tests, even with liquid cooling, it heated up to 90 degrees and above. However, it turned out that everything is not so simple.

Our colleagues at TechSpot decided to try out the Wraith Spire cooler and were surprised by the results.

Yes, the Ryzen 7000 gets very hot, but the Ryzen 5 7600X is quite enough to run the usual inexpensive cooler

Yes, the Ryzen 7000 gets very hot, but the Ryzen 5 7600X is quite enough to run the usual inexpensive cooler

So, if you do not perform any manipulations with the CPU, then, for example, in Cinebench R23, a processor with a boxed cooler scores 5% less points than with a GSO due to a 3% drop in frequency. At the same time, the temperature rises from 93 to 101 degrees, that is, not so much, given the difference in performance between the coolers.

Also for the Ryzen 7000, you can activate Eco Mode, which reduces the power limit to 65 watts. This allows you to reduce the temperature by 7-16 degrees, depending on the cooler, and the performance drops by literally 1.5-4%. It is also possible to activate the PBO2 mode with reduced voltage, which results in a less significant decrease in temperature, but performance is even improved, albeit only by 2%. As for power consumption, it drops by 24% in Eco Mode.

Yes, the Ryzen 7000 gets very hot, but the Ryzen 5 7600X is quite enough to run the usual inexpensive cooler

In games, the situation is different. They do not load the processor so much, therefore, the power consumption in most cases is very modest (about 60-80 W), and temperatures rarely reach even 60 degrees, that is, they are in a completely normal range.

As a result, we can state that even a cooler of the Wraith Spire level is enough for stable operation of the Ryzen 5 7600X with an almost imperceptible decrease in performance and a not very significant increase in temperature. However, this raises questions about the temperature regime of the Ryzen 7000 as a whole, because the difference (in CPU heating) between a fairly simple air cooler and liquid CO turns out to be insignificant, and this is strange. Exactly what architectural features or settings of the Ryzen 7000 lead to operation at such high temperatures, even with LSO, is not yet clear. Especially when you consider the rather modest power consumption, because it turns out that the Ryzen 5 7600X heats up to 100 degrees, consuming only about 90 watts.

Yes, the Ryzen 7000 gets very hot, but the Ryzen 5 7600X is quite enough to run the usual inexpensive cooler

But it is also worth understanding that such a situation will only occur in a number of applications that can fully load all the CPU cores, while in the same games both temperature and power consumption do not raise questions.

If you still want to lower the processor temperature, you can activate Eco Mode, which has almost no effect on performance.

Separately, it is worth recalling the words of AMD itself regarding the temperature regime of the Ryzen 7000. The company did not go into details regarding the reasons, only mentioning the 5 nm process technology, but assured that 95 degrees for new CPUs are the norm. The processor will strive to increase the frequencies as much as possible, remaining within the same 95 degrees, regardless of the CO used. At the same time, this temperature is not dangerous for the CPU, and only at 105 degrees the throttling process is activated.

Continue Reading

Components

Ryzen 7000 Thermal Grease Protection Introduced. Noctua NA-TPG1 Frame $8

Published

on

Ryzen 7000 Thermal Grease Protection Introduced Noctua NA TPG1 Frame 8

Ryzen 7000 processors have an unusually shaped cover, which is why applying thermal paste to CPU data has its own nuances.

Ryzen 7000 Thermal Grease Protection Introduced. Noctua NA-TPG1 Frame $8

Noctua decided to help buyers of such processors and introduced a special protection against excess thermal paste. The product is called NA-TPG1 and costs $8.

NA-TPG1 is just a plastic frame with a cutout in the shape of newer CPUs. It is enough just to put this frame on the processor before applying thermal paste and installing the cooler. If the thermal paste turns out to be more than necessary and the CO pressure squeezes it out, it will remain on the frame and will not get between the teeth of the CPU cover, from where it is quite difficult to remove.

Ryzen 7000 Thermal Grease Protection Introduced. Noctua NA-TPG1 Frame $8

NA-TPG1 is available on its own for $8, or bundled with NT-H1 or NT-H2 thermal pastes for $10 and $14 respectively.

Continue Reading

Most Popular