Connect with us
Intel what about the GPU Intel Core 13 Raptor Lake Intel what about the GPU Intel Core 13 Raptor Lake

News

Intel, what about the GPU? Intel Core 13 (Raptor Lake) CPUs will be noticeably better than Core 12 (Alder Lake) CPUs, but the company seems to have forgotten about the integrated GPUs

Published

on

There are already enough tests of the new Intel processors – Raptor Lake (aka Core 13) on the Web. The data indicates a noticeable increase in CPU performance – there are more cores and higher frequencies. But one should not expect miracles from the integrated GPU in Raptor Lake: judging by the Core i-13900 test, Intel did not touch the GPU at all – it migrated from the current Alder Lake.

Intel, what about the GPU?  Intel Core 13 (Raptor Lake) CPUs will be noticeably better than Core 12 (Alder Lake) CPUs, but the company seems to have forgotten about the integrated GPUs

In the Geekbench OpenCL test, the Core i9-13900’s built-in GPU earned 9498 points. For comparison, the result of the test iGPU Core i9-12900 – 9646 points. The iGPU in the Core i9-13900 received 32 execution units, and the frequency was 1650 MHz. The iGPU in the Core i9-12900 has the same 32 blocks, clocked at 1550 MHz.

Intel, what about the GPU?  Intel Core 13 (Raptor Lake) CPUs will be noticeably better than Core 12 (Alder Lake) CPUs, but the company seems to have forgotten about the integrated GPUs

iGPU Core i9-13900 test result
Intel, what about the GPU?  Intel Core 13 (Raptor Lake) CPUs will be noticeably better than Core 12 (Alder Lake) CPUs, but the company seems to have forgotten about the integrated GPUs
iGPU Core i9-12900 test result

Probably, due to better software optimization, the iGPU in the current flagship turned out to be faster, but in general, the performance of the iGPU processors of the two families will be on the same level. This is clearly not a problem for those who are going to use the CPU in a PC with discrete graphics, but still I wanted some quality changes in this area, and not just an on-duty increase in frequency by 100 MHz.

Click to comment

Leave a Reply

Your email address will not be published.

News

Kuwait will build the most pedestrian city in the world

Published

on

Kuwait will build the most pedestrian city in the world

The architectural company URB presented a project for a metropolis called XZERO. This city, according to the idea of ​​its creators, should become the most pedestrian in the world: it will be possible to move in it only on foot, by bicycle or electric buggies. Thus, it is planned to reduce emissions of harmful substances into the atmosphere and preserve the environment for future generations.

Kuwait will build the most pedestrian city in the world

According to the project, the city will be made in the form of a flower, the “petals” of which are residential areas. The central area is planned to be divided into zones, each of which has a specific function, for example, medical or educational. About 100 thousand people will be able to live in XZERO, and the city will also provide 30,000 “green” jobs.

Kuwait will build the most pedestrian city in the world

More than 65% of the metropolitan area (about 16 square kilometers) is dedicated to open spaces, including land for urban agriculture (community gardens, bio-domes, aquaponics and vertical farms), recreation areas, rainwater-permeable sidewalks, sports fields and courtyards. There is also a 35 km running track and a 9 km equestrian track that connects to the equestrian center.

Kuwait will build the most pedestrian city in the world

URB said the project has an estimated cost of US$15 billion and is scheduled to begin construction in 2024. The XZERO metropolis in Kuwait is expected to be ready by 2034.

Continue Reading

Electric Cars

The whitest paint in the world just got better. Now it can be used to paint cars and planes

Published

on

The whitest paint in the world just got better Now

The unique white paint, created by scientists at Purdue University, was recognized in the Guinness Book of Records in 2022. The unique composition is able to keep the surface cool, reducing the need for air conditioning.

Now researchers at Purdue University have developed a new compound that is thinner and lighter, ideal for removing heat from not only cars but other vehicles, including trains and planes.

The whitest paint in the world just got better.  Now it can be used to paint cars and planes

“Everyone has contacted me, from spacecraft manufacturers to architects to clothing and footwear companies,” said Xiulin Zhuang, professor of mechanical engineering and paint developer at Purdue University. “They basically had two questions: where can I buy it and can I make the layer thinner?”

The unique paint uses barium sulfate nanoparticles that can reflect 98.1% of sunlight, as well as cool outdoor surfaces by more than 4.5 degrees Celsius relative to the environment. However, for the coating to work effectively, its thickness had to be at least 400 microns.

The whitest paint in the world just got better.  Now it can be used to paint cars and planes

Thickness of old and new layer

Scientists experimented with other materials that could scatter sunlight. The latest paint formula includes hexagonal boron nitride as a pigment. This substance is most often used in lubricants. The resulting composition is able to meet all the declared parameters and reflect up to 97.9% of sunlight when applied in a layer with a thickness of 150 microns

Continue Reading

News

This battle will be legendary: Canon is determined to compete with ASML in the lithographic equipment market. She has already created a new technology. for this

Published

on

This battle will be legendary Canon is determined to compete

ASML has almost a monopoly in the market for lithographic equipment for the production of semiconductors. And now the Japanese manufacturer Canon intends to compete with it. A plant for the production of new lithographic equipment will be built in Japan. The estimated investment will amount to $345 million, and production will start in the spring of 2025.

This battle will be legendary: Canon is determined to compete with ASML in the lithographic equipment market.  She has already created a new technology.  for this

It is important to note that for the production there will use a technology called nanoprinting lithography. It eliminates the need for EUV lithography (deep ultraviolet lithography), which requires a lot of energy and is expensive. EUV lithography machines only produce ASML.

Canon’s new technology will reduce the cost of production due to the fact that nanoprinted lithography can reduce production costs by up to 40% and energy consumption by up to 90%.

Note that the technology of nanoprinted lithography was developed more than 10 years ago, it allows you to create schemes for 10 nanometers with a potential reduction to 2-3 nanometers. However, implementation issues forced the market to switch to EUV lithography. If the technology can prove its worth, this can lead to a significant reduction in the cost of microelectronics.

Earlier it was reported that the US authorities require ASML Holding NV not to supply equipment for the production of chips to China.

Continue Reading

Most Popular