Connect with us
Innodisk Delivers First Industrial Grade PCIe 40 Solid State Drives Innodisk Delivers First Industrial Grade PCIe 40 Solid State Drives

Components

Innodisk Delivers First Industrial-Grade PCIe 4.0 Solid State Drives

Published

on

Innodisk has announced the release of PCIe 4.0 industrial-grade solid-state drives. The introduction of 5G networks and artificial intelligence of things (AIoT) increases the requirements for the volume and speed of storage, she said. Increasing the volume to 4 GB and doubling the speed allowed the transition from PCIe 3.0 to PCIe 4.0. The novelties presented by Innodisk, in contrast to similar consumer models, are designed to operate in a wide temperature range – from -40 ° C to 85 ° C.

The drives use 112-layer 3D TLC flash memory. They are TCG OPAL 2.0 compliant, equipped with PCIe Gen4 x4 interface, and support AES-256 encryption and NVMe protocol. One of the notable innovations is Namespace technology, which provides higher read and write efficiency and longer SSD lifespan.

The list of new products includes M.2 2280 4TE (256 GB to 2 TB), M.2 2280 4TG-P (256 GB to 2 TB) and M.2 2280 4TG2-P (128 GB to 4 TB). The manufacturer does not provide prices, speed and resource indicators, limiting himself to the promise that trial samples of drives will be available in October.

Click to comment

Leave a Reply

Your email address will not be published.

Components

For the GeForce RTX 4090, a power supply with a capacity of up to 1200 W is recommended

Published

on

For the GeForce RTX 4090 a power supply with a

It’s no secret that Nvidia’s GeForce RTX 4090 graphics cards need powerful power supplies, but official recommendations from Nvidia partners vary.

Some manufacturers follow Nvidia’s recommendations for a standard 850W PSU, but many manufacturers list 1000W PSUs as recommended, some even insist on a 1200W PSU.

Asus recommends a 1000W PSU for its ROG Strix graphics card. Asus suggests this because the company assumes that users will be overclocking both the CPU and the GPU. The Gigabyte Aorus Master and Zotac AMP Extreme/Trinity RTX 4090 graphics cards have the same power supply recommendation of 1000W.

For the GeForce RTX 4090, a power supply with a capacity of up to 1200 W is recommended

MSI, PNY, Galax, and Inno3D recommend an 850W PSU. However, Palit recommends using up to 1200W power supply for its RTX 4090 GameRock graphics card, which is the most stringent requirement among graphics card manufacturers today.

Today we already wrote that the GeForce RTX 4090 graphics card can consume more than 600 watts without any extreme overclocking. And when using the most powerful processors and overclocking, the power of the entire system will be much higher.

Continue Reading

Components

The first example that the GeForce RTX 4090 can consume over 600 watts. Card tested at Furmark

Published

on

The first example that the GeForce RTX 4090 can consume

The GeForce RTX 4090 graphics card can indeed draw over 600W without any extreme overclocking.

The first example that the GeForce RTX 4090 can consume over 600 watts.  Card tested at Furmark

The results of testing new items in Furmark have already appeared on the Web. In the msi-01 base test, the GPU frequency reached 3 GHz, and the power consumption was 426 W, but in the notorious Donut test, the frequency, although significantly lower (2.64 GHz), consumed the card almost 616 W! This test loads 3D cards much more heavily, which, as we can see, has a noticeable effect on power consumption.

The first example that the GeForce RTX 4090 can consume over 600 watts.  Card tested at Furmark

The first example that the GeForce RTX 4090 can consume over 600 watts.  Card tested at Furmark

In this case, the tests were carried out with a liquid cooler and, judging by the core frequency, in overclocking. Of course, without overclocking and in games, the consumption of the RTX 4090 will never reach what we see in the Donut test, but at the same time, such results mean that this is far from the limit for the adapter, and consumption during extreme overclocking can only be imagined .

Continue Reading

Components

Will the GeForce RTX 5090 and Radeon RX 8950 XT have such memory? Samsung to produce 36GHz GDDR7 memory

Published

on

Will the GeForce RTX 5090 and Radeon RX 8950 XT

Samsung at the Samsung Tech Day 2022 event talked about the achievements and plans for its semiconductor business, at the same time touching on the topic of GDDR7 memory for future generations of video cards.

Will the GeForce RTX 5090 and Radeon RX 8950 XT have such memory?  Samsung to produce 36GHz GDDR7 memory

There are practically no details yet, we do not know when such memory will appear on the market, but Samsung indicated its frequency – 36 GHz!

Recall that GDDR6X memory currently runs at 21 GHz in some 3D cards. Of course, in all these cases we are talking about the effective frequency, but this applies to any such memory.

If we talk about top-end graphics cards with 384-bit bus, 36 GHz memory will provide 1.7 GB / s bandwidth! Probably, this will significantly speed up the new generation of 3D maps, even without taking into account new GPUs.

Continue Reading

Most Popular