Connect with us
Helio G95 695 inch display 90 Hz 64 MP 5000 mAh Helio G95 695 inch display 90 Hz 64 MP 5000 mAh

Phones

Helio G95, 6.95-inch display, 90 Hz, 64 MP, 5000 mAh and 33 W. Infinix Note 10 Pro smartphone presented

Published

on

Infinix has unveiled the Infinix Note 10 series of smartphones, which includes the Infinix Note 10 and Infinix Note 10 Pro models. Both devices have a 6.95-inch LCD panel with a resolution of 1080 x 2460 pixels with a polling rate of the touch layer of 180 Hz, a contrast ratio of 1500: 1 and a hole for the front camera. The older model has a 90-Hz screen, while the younger has a 60-Hz screen.

The Infinix Note 10 is powered by a MediaTek Helio G85 SoC and eMMC flash. The Note 10 Pro, on the other hand, is powered by the MediaTek Helio G95 mobile platform and UFS 2.1 flash storage. The younger version is available with 4/64 and 6/128 GB, and the older one is offered with 8/256 GB.

The Infinix Note 10 Pro is equipped with four cameras with image sensors with a resolution of 64, 8, 2 and 2 megapixels, while the younger version has a triple camera with a resolution of 48, 2 and 2 megapixels. The front camera of both smartphones is 16-megapixel.

The phones support dual SIM, 4G, dual band Wi-Fi, Bluetooth, 3.5mm headphone jack, microSD card slot, and USB-C. They are equipped with all the sensors you need, including an accelerometer, ambient light sensor, gyroscope, proximity sensor, compass and side fingerprint scanner.

The smartphones run XOS 7.6 based on Android 11 and come with a 5000mAh battery. The Infinix Note 10 supports 18W fast charging, while the Infinix Note 10 Pro comes with 33W charging support.

The price starts at $ 150. The older model costs $ 233.

Click to comment

Leave a Reply

Your email address will not be published.

Phones

The long-awaited Always-On Display in the iPhone 14 Pro and 14 Pro Max will allow you to display widgets from the lock screen

Published

on

The long awaited Always On Display in the iPhone 14 Pro and

All the latest data indicates that at least the older smartphones of the iPhone 14 line will receive Always-On Display support.

The long-awaited Always-On Display in the iPhone 14 Pro and 14 Pro Max will allow you to display widgets from the lock screen

According to Bloomberg journalist Mark Gurman, the Always-On Display on the iPhone 14 Pro and 14 Pro Max models will allow new widgets created for the lock screen to be displayed on the screen.

This means that not only the clock can be displayed on the off screen, but also the calendar, unread messages, weather forecast, stock quotes, and so on. All that is in the form of widgets for the lock screen. How it will be possible to interact with such data in Always-On Display mode is still unknown.

The older models of the new generation, we recall, are credited with 120 Hz screens that are capable of reducing the frame rate to 1 Hz. This will allow smartphones to consume battery power very economically in Always-On Display mode.

Continue Reading

Phones

Unique on the outside and simple on the inside. Nothing Phone (1) specs leaked before announcement

Published

on

Unique on the outside and simple on the inside Nothing

Although the new Nothing Phone (1) smartphone is already available for pre-order in India, the developers have not yet confirmed its specifications.

Nothing is said to be in talks with Reliance Digital to sell the Nothing Phone (1) in its retail stores. The expected characteristics of the device were also published.

Nothing Phone (1) will receive a FullHD + OLED screen with support for a refresh rate of 120 Hz. It will be built on the basis of a Snapdragon 778G + single-chip system, the amount of RAM will be 8 GB.

Unique on the outside and simple on the inside.  Nothing Phone (1) specs leaked before announcement

The main camera will be equipped with image sensors with a resolution of 50 and 16 megapixels, the front camera will be 16 megapixels. The battery capacity will be 4500 mAh, it will support 45-watt charging.

The smartphone will run on the Android 12 operating system with the Nothing OS shell and proprietary Glyph Interface installed.

The presentation of Nothing Phone (1) is expected on July 12th.

Continue Reading

Phones

The first smartphone based on Dimensity 9000+ will receive 200-watt charging. Details about iQOO 10

Published

on

The first smartphone based on Dimensity 9000 will receive 200 watt

According to the latest information released by trusted source Digital Chat Station, the iQOO 10 will be the first phone based on the single cryo-published Dimensity 9000+ system.

The Mediatek platform was only announced last week as an improved version of the Dimensity 9000. It has a slight CPU and GPU performance boost, as well as some improvements. The high-performance Cortex-X2 core operates at clock speeds up to 3.2GHz. The Taiwanese manufacturer promised that the first devices with this platform will be released in the third quarter.

The first smartphone based on Dimensity 9000+ will receive 200-watt charging.  Details about iQOO 10

According to previous reports, iQOO 10 should also use the Qualcomm Snapdragon 8 Plus Gen 2 SoC. It seems that iQOO is going to release two versions of the new flagships, offering the customer the choice.

The iQOO 10 is also expected to support 200W ultra-fast charging technology, which will fully charge the battery in just 12 minutes. This will be a new record.

The iQOO 10 will reportedly use a side-curved LTPO 2K screen with 120Hz refresh rate support and a large-area ultrasonic fingerprint under the screen. The main camera will be 50 megapixels.

Digital Chat Station was the first to accurately announce the specifications and release dates of Redmi K50 and Xiaomi 12.

Continue Reading

Most Popular