Connect with us
GeForce RTX 4090 instead of a heater Nvidias monster next generation GeForce RTX 4090 instead of a heater Nvidias monster next generation

Components

GeForce RTX 4090 instead of a heater. Nvidia’s monster next-generation top-end card will run at incredibly high frequencies

Published

on

The GeForce RTX 4090 video card is credited with a colossal power consumption of about 450-600 watts. Probably not least the reason for this will be the very high frequencies of the GPU.

GeForce RTX 4090 instead of a heater.  Nvidia's monster next-generation top-end card will run at incredibly high frequencies

According to recent data, the core of the new generation of Nvidia’s top-end card will operate at a frequency of 2235-2520 MHz. To be more precise, these will be the reference frequencies, and the actual frequencies will allegedly be around 2750 MHz. And this is a very high frequency for a huge and complex GPU. For comparison, the base frequency of the RTX 3090 is only 1395 MHz, and the increased frequency is 1695 MHz.

That is, the new Nvidia architecture and the new process technology will allow next-generation 3D cards to operate at very high frequencies. Now the architecture of RDNA 2 and the Radeon RX 6000 cards can boast of this.

The same RTX 4090 at this frequency and 16,384 CUDA cores attributed to it will be characterized by a performance of 90 TFLOPS, that is, almost twice as high as that of the RTX 3090.

At the same time, the frequencies of the lower RTX 40 cards can be even higher, that is, they can reach or exceed 3 GHz. Approximately the same is attributed to the Radeon RX 7000 video cards.

The source in this case is the insider kopite7kimi, who previously accurately described the parameters of upcoming video cards many times.

Click to comment

Leave a Reply

Your email address will not be published.

Components

The first PC based on AMD Ryzen 8000 processors has been introduced. The Minisforum V3 tablet will be very large

Published

on

The first PC based on AMD Ryzen 8000 processors has

Despite the fact that there are clearly at least a few months left before the official announcement of Ryzen 8000 processors, Minisforum has already presented the first product based on such CPUs.

The first PC based on AMD Ryzen 8000 processors has been introduced. The Minisforum V3 tablet will be very large

We are talking about a tablet, which is currently called Minisforum V3, but this is hardly the final name. The device will be based on the as-yet unnamed AMD Ryzen 8000 hybrid processor from the Hawk Point line. So far, all that is known about it is that its TDP will be 22-28 W, that is, it will be a model of the Ryzen 8000U line.

It is known about Hawk Point processors that these will be updated Phoenix models. They will carry the same Zen 4 cores, but the GPU will be based on the updated RDNA 3.5 architecture. In addition, the new APUs will have an XDNA block for working with AI.

The first PC based on AMD Ryzen 8000 processors has been introduced. The Minisforum V3 tablet will be very large

Returning to the tablet, Minisforum is already talking about DDR5-6400 memory, two USB4 ports, an SD card slot, Wi-Fi 6E and Bluetooth 5.2. The tablet will also offer a huge 14-inch screen with a frame rate of 165 Hz and QHD+ resolution, four speakers, a fingerprint scanner, a 5 MP camera, stylus support and a battery with a capacity of more than 50 Wh.

Considering that the current Ryzen 7000U has a very powerful iGPU, the new processors should be even faster in this regard, meaning such a tablet can also be used for games.

Continue Reading

Components

Intel’s recent statement was misinterpreted. There will still be no full-fledged Meteor Lake-S desktop processors

Published

on

Intels recent statement was misinterpreted There will still be no

Intel seems to have decided to confuse the public with its plans for the desktop processor segment. It turns out that there will still be no full-fledged desktop models of Meteor Lake-S.

Intel's recent statement was misinterpreted.  There will still be no full-fledged Meteor Lake-S desktop processors

Yes, Intel executive vice president and general manager of the client computing group Michelle Johnston Holthaus said just the day before yesterday that such CPUs would be released in 2024, which raised questions about three lines at once in one year. However, it now turns out that Holthaus did not actually mean the desktop segment in the form in which it is usually understood. Meteor Lake processors will indeed appear in desktop PCs, but this does not mean that such CPUs can be purchased separately and assembled into a computer based on them. In fact, Meteor Lake-S in the desktop segment will only be available in all-in-one PCs.

Meteor Lake is a power-efficient architecture that will power innovative mobile and desktop designs, including desktop form factors such as All-in-One (AIO). We will share more details about the product in the future

Intel

Intel already has experience releasing core KB desktop processors, which were only available in mini-PCs. Apparently, it will be the same story with Meteor Lake-S. Moreover, it is likely that technically these processors will completely copy mobile versions, except that the TDP may be higher.

That is, in 2024 we will have only two desktop lines: Raptor Lake Refresh, which will be released in October of this year, and then Arrow Lake-S sometime next year.

Continue Reading

Components

The GeForce RTX 5090 will not repeat the fate of the fire-hazardous RTX 4090. Tests of the 12V-2×6 power connector showed that it works even when connected incompletely

Published

on

The GeForce RTX 5090 will not repeat the fate of

Back in July, we learned that Nvidia was working on a replacement for the fire-hazardous 12VHPWR connector. And now the first tests of the 12V-2×6 connector have appeared on the Internet, which should replace the 12VHPWR.

The GeForce RTX 5090 will not repeat the fate of the fire-hazardous RTX 4090. Tests of the 12V-2x6 power connector showed that it works even when connected incompletely

The authors of the HardwareBusters channel visited the laboratory of Linewell, which produces power cables, including for video card manufacturers.

Linewell tested the cable with the new connector, and tested it in a format that simulated the most common cause of 12VHPWR melting. At first, Linewell specialists tested it in normal mode for almost an hour, and the connector only heated up to 46.5 degrees. Then the cable was not connected completely, which usually leads to melting, and a power of more than 640 W was applied to it, that is, exceeding the established limit of 600 W. The connector passed the test, heating up to only 41 degrees.

Continue Reading

Most Popular