Connect with us
BenQ X3000i 4K HDR Gaming Projector BenQ X3000i 4K HDR Gaming Projector

News

BenQ X3000i 4K HDR Gaming Projector

Published

on

BenQ has released an unusual projector, which the manufacturer itself addresses to gamers. The X3000i is a 4-LED DLP projector that boasts low input lag. At 4K resolution, it supports 60Hz frame rate. Other than that, there are two 1080p game modes. In one, the frame rate can reach 240 Hz with an input lag of 4.16 ms, in the other it can reach 120 Hz with an input lag of 8 ms. The projector is equipped with three HDMI 2.0b ports, one of which includes a module that turns the X3000i into a smart projector. This is a BenQ QS01 module updated to Android 10. In addition to the HDMI ports, there is one USB Type-A 2.0 port that can output 2.5A, an RS232 port, a 12V jack, a 3.5mm audio jack, and an optical S/PDIF output . One of the HDMI ports supports eARC, and the X3000i has a pair of 10W speakers built in.

BenQ X3000i 4K HDR Gaming Projector

BenQ X3000i 4K HDR Gaming Projector
BenQ X3000i 4K HDR Gaming Projector
BenQ X3000i 4K HDR Gaming Projector

The description notes a 1.3x zoom option, which can reduce the projection distance. From a distance of three meters, the X3000i can produce an image measuring 120 inches (305 cm) diagonally. There are three brightness settings. The maximum luminous flux is 3,000 lumens and the contrast ratio with light source dimming enabled is 500,000:1. There are also several image presets for RPG, FPS and sports games. The projector weighs 6.4 kg and has a typical power consumption of 330 watts. It costs 1899 euros.

.

Click to comment

Leave a Reply

Your email address will not be published.

Components

Engineers came up with a way to increase the cooling efficiency of processors by 700%

Published

on

Engineers came up with a way to increase the cooling

US engineers have come up with a new way to cool semiconductor products, which does not involve the use of a thermal interface. Conformal coating in laboratory conditions has demonstrated its high efficiency in comparison with traditional methods of heat removal.

Engineers came up with a way to increase the cooling efficiency of processors by 700%

Electronic devices heat up during operation, and the greater the power, the stronger the heating, all other things being equal. This problem is especially acute with the miniaturization of devices. Researchers at the University of Illinois at Urbana-Champaign have come up with a new efficient way to remove heat from semiconductor products.

Usually, a radiator is connected to the hottest places of the microcircuit through a thermal interface. For example, thermal paste. Instead, American scientists proposed to cover the entire device with a thin layer of polymer insulator, and “fill” it with a layer of copper on top, completely repeating the shape of the device. This conformal coating is in close contact with the device and effectively removes heat from it.

Engineers came up with a way to increase the cooling efficiency of processors by 700%

“We compared our coatings to standard heat dissipation methods. It turned out that our method dissipates 740% more power per unit volume.one of the researchers explained.

It is expected that in the future this invention will make electronic devices, including telephones and computers, more powerful and compact.

Continue Reading

News

US military space intelligence to spend ‘billions of dollars’ buying satellite imagery from commercial companies

Published

on

US military space intelligence to spend billions of dollars buying

The US National Space Reconnaissance Office announced the largest ever contracts worth “billions of dollars” for the purchase of satellite imagery from commercial companies. There are three such companies – BlackSky, Maxar and Planet.

US military space intelligence to spend 'billions of dollars' buying satellite imagery from commercial companies

“These contracts, which are valued in the billions of dollars and will run for the next 10 years, represent a historic expansion of commercial imagery purchases by the National Space Intelligence Agency.”the agency said in a statement.

The exact amount of contracts is not called. It is noted that they are concluded for five years with the possibility of an additional extension until 2032.

Continue Reading

Phones

Huge cheap smartphone with a giant battery. Tecno Pova 3 introduced

Published

on

Huge cheap smartphone with a giant battery Tecno Pova 3

Tecno introduced the Pova 3 smartphone, which boasts a huge battery and a huge screen.

Huge cheap smartphone with a giant battery.  Tecno Pova 3 introduced

The novelty received a 6.9-inch 90-Hz IPS display with Full HD + resolution. The battery capacity is 7000 mAh. Samsung has stopped experimenting with such smartphones, so it is very, very difficult to find something like this on the market.

The heart of the novelty is the SoC MediaTek Helio G88. There are 4 or 6 GB of RAM and 64 or 128 GB of flash memory. The main camera is represented primarily by a 50-megapixel main sensor, and the other two can be left out, as these are just “plugs” with a resolution of 2 megapixels. The resolution of the front camera is 8 megapixels.

Huge cheap smartphone with a giant battery.  Tecno Pova 3 introduced

From the rest, we can note stereo speakers, a design diluted with a vertical stripe, 25-watt charging and 10-watt reverse charging. By the way, for some reason, a 33-watt charger comes with the device, so this value appears in some promotional materials, which is confusing.

In the Philippines, where the smartphone first debuted, it costs just $172.

Continue Reading

News

Netflix hid nine NFTs in its Love, Death + Robots series

Published

on

Netflix hid nine NFTs in its Love Death Robots

The third season of Love, Death & Robots premiered on Netflix last Friday. The service prepared a surprise and placed QR codes in different places and episodes that allow you to “mint” NFTs.

Netflix hid nine NFTs in its Love, Death + Robots series

Minting, also often referred to as minting, is the process of creating a non-fungible token and “registering” it on the blockchain. Usually, in order to “mint” NFT, you need to pay a network fee. After that, information about the non-fungible token and its author will be included in the blockchain.

The most popular NFT minting network is Ethereum. In February 2022, the amount of non-fungible ETH tokens used for minting reached a maximum.

The action is calledHunting 101“. The point is that the organizers hid 9 different NFTs in the form of QR codes. And the task of the viewer is to find them.

NFTs can be found both in the digital world of the series and in the real world: for example, on billboards and billboards.

When the user has found and scanned the QR code, it is necessary to mint the token through a smart contract. Or the second option is to simply download the JPEG image to your device.

According to the show’s official OpenSea account, viewers have only found three NFTs so far.

The number of tokens is not limited. This means that any user can find the same QR code and mint the NFT. The company does not charge for this. But in order to transfer NFT to your Metamask wallet, you need to pay for gas on the Ethereum network.

Further, the user can keep the tokens for himself for the collection, or resell on OpenSea. Now the average price of an NFT from Netflix is ​​0.0031 ETH (about $30).

Continue Reading

Most Popular